Watchdog - Avaya Customer Interaction Express 1.0 User Manual

Watchdog

The Watchdog application is used to restart the software after a full or partial system failure as soon as the
necessary components are available again.
1. The guided installation is started. Select Watchdog.
2. Click Install. The Welcome dialog opens.
3. Click Next. The Choose Setup Type dialog opens.
4. Click Complete. The General Settings dialog opens. Enter the following settings.
Setting
Host name of Trace
system server
5. Click Next. The Ready to install dialog opens.
6. Click Install.
7. Click Finish to complete the installation.
Preconfiguration
For information on how to configure the Watchdog, see "Preconfiguration for the Watchdog" on page 62
Comments
Specify the host name or TCP/IP number of the PC running the trace
server.
Installing the server components
Edition: 1.1 03/08/2007 61