Connecting to I55
Quick-start guide
You can connect an I55 PBX using an ISDN card and the Module Manager, or use an I55 with L02.
The following tables are quick-start guides for the respective topics. If you have already set up several
systems and have the necessary experience, you can use the tables as a memory aid. This quick-start
guide is intended for experienced users.
The tables include the necessary setup steps and instructions in abbreviated form. See the corresponding
topic for full instructions.
Connecting an I55 PBX with L02
To connect an I55 PBX with L02, carry out the following steps.
Step
Action
1.
Install the I55 task server
2.
Connect to L02
Notes
Host name of the CORBA naming service
Host name of Trace system server
Configuration module
PBX tab
Version
PBX access
Connecting to I55
Edition: 1.1 03/08/2007
155