Installing The I55 Task Server; Prerequisites; Installation - Avaya Customer Interaction Express 1.0 User Manual

Installing the I55 task server

To connect an I55 PBX to a CIE system, you must install the I55 task server.

Prerequisites

You must first install all necessary components except the I55 task server.

Installation

To install the I55 task server, follow these steps. Use the guided installation as usual.
1. The guided installation is started. Select I55 task server.
2. Click Install. The Welcome dialog opens.
3. Click Next. The End User License Agreement dialog opens.
4. Select
5. Click Next. The Choose Setup Type dialog opens.
6. Click Complete. The General Settings dialog opens. Enter the following settings.
Settings
Host name of the
CORBA naming Service
Port
Host name of Trace
system server
Port
7. Click Next. The Ready to Install dialog opens.
8. Click Install. This takes about five seconds.
9. Click Finish to complete the installation.
accept the terms in the License Agreement.
Comments
Specify the host name or TCP/IP number of the PC running the Corba
naming service. Do not use localhost as the host name.
As a general rule, use the default port 2809.
Specify the host name or TCP/IP number of the PC running the trace
server.
Port 10300 is the default setting. You cannot edit this entry.
Connecting to I55
Edition: 1.1 03/08/2007 157