Startup; Defining The Start Sequence Of Processes In Watchdog; Default Processes - Avaya Customer Interaction Express 1.0 User Manual

Startup

After installing CIE with UMR, you must define the start sequence in the Watchdog (for CIE and UMR
processes) and configure the CIE system.
You can also consult "Processes that run on a CIE server" on page 73 to learn about these processes.

Defining the start sequence of processes in Watchdog

You can configure the sequence in which individual processes are started in the Watchdog.
For more detailed information about the Watchdog, see the Watchdog V4.X User Manual.
Always ensure you have set the correct start sequence for processes in the CIE system.

Default processes

The following processes must run on each CIE server regardless of whether the system is an email system
or a system with an I55 or ACM PBX.
Services (start type automatic)
The following processes are installed as services that start automatically.
• OmniOrb (Automatic)
• TTrace (Automatic)
• Watchdog (Automatic)
• UI Session Manager (Automatic)
• TomCAT (Automatic)
Watchdog
The following processes must be started by the Watchdog in each CIE system.
• db_srv
• lna_srv
• TaskserverManager
• Kernel
• Vectors
• ReportGenerator (man. service)
• Monitor_srv
• Statistic_srv
246 User Manual CIE 1.0 System Administration