Dspf Controller; Application; Installation - Avaya Customer Interaction Express 1.0 User Manual

DSPF controller

If you want to transfer announcements to the PBX, you need the DSPF controller application. You usually
install the DSPF controller application on an interface PC or a separate PC.
Note: Setup does not fully install the driver for the VTB. When you connect the VTB, the operating system
automatically detects the new hardware and begins the driver installation. A dialog window prompts you
to enter the path for the driver files. The files are in the directory where you installed the DSPF controller.

Application

For further information see the DSPF controller user manual.

Installation

To install the DSPF controller, follow these steps. Setup does not fully install the driver for the VTB. Use
the guided installation as usual.
1. The guided installation is started. Select DSPF Controller.
2. Click Install. The Welcome dialog opens.
3. Click Next. The End User License Agreement dialog opens.
4. Select
5. Click Next. The Choose Setup Type dialog opens.
6. Click Complete. The General Settings dialog opens. Enter the following settings.
Settings
Host name of the
CORBA naming Service
Port
Host name of Trace
system server
Port
172 User Manual CIE 1.0 System Administration
accept the terms in the License Agreement.
Comments
Specify the host name or TCP/IP number of the PC running the Corba
naming service. Do not use localhost as the host name.
As a general rule, use the default port 2809.
Specify the host name or TCP/IP number of the PC running the trace
server.
Port 10300 is the default setting. You cannot edit this entry.