Setting Up A Route - Avaya Customer Interaction Express 1.0 User Manual

Setting up a route

You must set up a route that connects the code and trunk group.
Command
change route-pattern 6
Settings
You must change the following settings on page 1.
Setting
Grp. No
FRL
TSC
CA-TSC Request
Numbering Format
Illustration
The figure below shows the settings described in the table.
Connecting to ACM (Avaya Communication Manager)
Setting Explanation
6 Enter the assigned trunk group.
0 This entry is important if you enter more than one
equivalent route to assign priorities to the routes.
y -
as-needed -
lev0-pvt Stands for level 0, private.
Edition: 1.1 03/08/2007 129