Configuration Pbx I55 For Dts2; Configuring The Icu Data For The Digital S0-User; Features - Avaya Customer Interaction Express 1.0 User Manual

Configuration PBX I55 for DTS2

You must configure the access for Voice Control as type DTS2.
You need a DT2 slide-in card.

Configuring the ICU data for the digital S0-user

You configure the type DT2/MIT2 digital line card T2/TIE.
You must make the following settings.
• Call reference length: Length 2
• Access type: Subscriber
• Protocol: ETSI

Features

ANLM:
You must set the PBX feature "RZA".
AOLM
The following connecting device features are important for running a Voice Control with an I55 PBX.
AOLM
EMU
AMT
IVR
IVRVU
196 User Manual CIE 1.0 System Administration
Explanation
Hold-for-pickup
Direct outward dialing
The feature IVR (Interactive Voice Response) must be enabled. To be able to
distinguish different functional variants of a voice unit, the following features can be set
in addition.
Variant Voice Unit (multi B-channel)
The VU can have independent connections on each B-channel. Each connection can
use Hold/Retrieve and Call Transfer (ECT). The B-channels are assigned by the ISDN
card of the IVR.