Installing The Pbx Task Server - Avaya Customer Interaction Express 1.0 User Manual

Installing the PBX task server

To install the PBX task server, follow these steps.
1. The guided installation is open. Start Avaya PBX Taskserver. The Welcome dialog opens.
2. Click Next. The Setup Type dialog opens.
3. Use the default setting Complete.
4. Click Next. The General Setting dialog opens. Enter the following settings.
Settings
Host name of the
CORBA naming service
Port
Host name of Trace
system server
Port
5. Click Next. The Ready to Install the program dialog opens. The list shows sample settings.
install Feature TaskServer
install Feature VEA
InstallDir = C:\Program Files\Avaya\pbxtaskserver\
NameServer Hostname = vmw2k3 Port = 2809
TTraceServer Hostname = vmw2k3 Port = 10300
6. Click Install. The component is installed. This takes about 10 seconds.
7. Click Finish.
Connecting to ACM (Avaya Communication Manager)
Explanation
Specifies the host name or TCP/IP address of the OmniOrb server.
Shows the port of the OmniOrb name server. Port 2809 is the default.
Specifies the host name or TCP/IP address of the TTrace server.
Indicates the port of the TTrace server. Port 10300 is the default.
Edition: 1.1 03/08/2007 139