Step 6: Installing The Address Book Server - Avaya Customer Interaction Express 1.0 User Manual

Step 6: Installing the address book server

To install the address book server, follow these steps.
1. The guided installation is started. Select Address book server.
2. Click Install. The Address Book Server - Setup dialog opens.
3. You must enter the user (User name) and password (Password).
4. Click OK. The Address Book Server - Setup dialog opens.
5. Click Next. The License Agreement dialog opens.
6. Select
7. Click Next. The Destination Folder dialog opens.
Use the default setting ..\Avaya\Customer Interaction Express\.
8. Click Next. The General settings dialog opens. You must enter the following information.
Settings
Host name of CORBA
Naming Service
Port
Host name of Trace
system server
Port
9. Click Next. The Configuration dialog opens. You must enter the following information.
Settings
Size of adb database device (MB)
Install adb device (adbdb.dat) and
adb log-device (adblog.dat) to
10. Click Next. The Ready to Install the Program dialog opens.
11. Click Install. The Installing Address Book Server dialog opens. The time it takes to install the
database depends on the size of the database.
12. Click Finish to complete the installation.
I accept the terms in the license agreement.
Comments
Specify the host name or TCP/IP number of the PC running the Corba
naming service. Do not use localhost as the host name.
In general, use the default setting 2809.
Specify the host name or TCP/IP number of the PC running TTrace.
Port 10300 is used. You cannot change this setting.
Comments
In general, use the default setting 500 MB. One GB holds
100000 address entries.
To select a different folder, select Change. Use the default
setting.
Installing the UMR
Edition: 1.1 03/08/2007 245