Preconfiguration For Module Manager (Communication Manager); Check The Type Of Start And Set Reactions Upon Service Failure - Avaya Customer Interaction Express 1.0 User Manual

Preconfiguration for Module Manager (Communication Manager)

Once you have installed the Module Manager (Communication Manager), configure the following settings.

Check the type of start and set reactions upon service failure

After you restart your PC, the Communication Manager should start automatically. Check the start type.
You must also set the reactions upon service failure.
1. Click Start - Settings - Control Panel - Administration.
2. Double-click Services. The list must contain the Communication Manager.
3. Double-click the Communication Manager service. The properties are displayed.
4. Check if Automatic is set as start type.
5. You must change the following settings on the Restore tab.
First failed attempt: Restart the service
Second failed attempt: Restart the service.
6. Click Apply to save your settings.
168 User Manual CIE 1.0 System Administration