Snmp Agent - Supermicro MBM-GEM-004 Web User Manual

3.11 SNMP AGENT

Layer2 SMIS supports only SNMP Agent. By default SNMP Agent is enabled.
SNMP Agent provides the following configurations.
SNMP Community Settings - To configure SNMP community including community index, name,
security name,
SNMP Group Settings - To configure SNMP groups including group name, security name,
security model and storage type.
SNMP Group Access Settings - To configure SNMP groups access parameters including group
name, security model,
SNMP View Tree Settings - To configure SNMP view tree including view name, sub tree, mask,
type of
SNMP Target Address Settings - To configure SNMP target including target name, target IP,
transport tag,
SNMP Target Parameter Settings - To configure SNMP target parameters including parameter
name, MP model,
SNMP Security Settings - To configure SNMP security including user name, authentication
protocol, authentication
SNMP Trap Settings - To configure SNMP trap notifications including notify name, notify tag,
notify type and storage type.
Release: 1.0
MBM-GEM-004 Switch Web User Guide
context name,
security level, storage
the view
param
security model,
key, privacy protocol,
transport tag
type, and read,
and
and
name, level
privacy key
and storage type.
write, notify view.
storage type.
storage type.
and storage type.
and storage type.
52 / 164