Selecting Single Point Measurement Or List Measurement - Agilent Technologies Twelfth 4287A RF LCR Operation Manual

Selecting Single Point Measurement or List Measurement

When the setup display appears, press the
either the single point measurement display (Figure 7-1) or the list measurement display
(Figure 7-2). After that, pressing the
measurement display and the list measurement display.
Figure 7-1 Single point measurement display
Figure 7-2 List measurement display
Chapter 7
Executing Measurements and Displaying Results
Selecting Single Point Measurement or List Measurement
[Meas View]
key toggles between the single point
[Meas View]
key on the front panel to display
157