Measurement Accessories - Agilent Technologies E8356A Configuration Manual

Measurement accessories

A complete line of RF test accessories can be found in the
Agilent RF and Microwave Test Accessories Catalog (literature
number 5968-4314EN) or by visiting www.agilent.com/find/mta
Accessories are available in these connector types: 50 ohm
Type-N, 3.5 mm, 7 mm, and 7-16. Test port cables and a
calibration kit should be added for a complete measurement
system. A verification kit is used to verify corrected system
performance.
Test-port cables
Test port cables are used to connect the network analyzer to
the device under test.
❐ N6314A 50 ohm Type-N RF cable, 300 kHz to 9 GHz
Includes one 610 mm (24 in) cable with male connectors
(part number 8120-8862)
❐ N6315A 50 ohm Type-N RF cable, 300 kHz to 9 GHz
Includes one 406 mm (16 in) cable with one male and one
female connector (part number 8121-0027)
❐ N3839A 50 ohm Type-N RF cable, 300 kHz to 9 GHz
Includes one 406 mm (16 in) cable with male connectors
(part number 8121-0101)
Calibration kits
Mechanical calibration kits include standards, such as
open/short circuits and loads, which are measured by the
network analyzer for increased measurement accuracy.
Electronic calibration (ECal) kits replace mechanical calibra-
tion standards with one solid-state calibration module that
is controlled by the network analyzer to present many differ-
ent impedances to the test ports. A full two-port calibration
can be performed quickly with a single connection. This tech-
nique reduces errors and connector wear and abrasion.
Choose a calibration kit for each connector type to be used.
Economy, includes:
• open standards (male and female)
• short standards (male and female)
• fixed-termination standards (male and female)
• in-series adapters
Standard, includes the devices in the economy kit and adds:
• connector tools
Precision, includes the devices in the economy kit and adds:
• 50 ohm airline for TRL calibration
• TRL adapters
• connector tools
For devices with Type-N connectors
Mechanical calibration kits
❐ 85032F economy: 30 kHz to 9 GHz. Includes:
85032-60017 Type-N (m) fixed load
85032-60018 Type-N (f) fixed load
85032-60013 Type-N (m) open
85032-60014 Type-N (f) open
85032-60016 Type-N (m) short
85032-60015 Type-N (f) short
❐ Option 100 adds:
85032-60021 Type-N (f) to Type-N (f) adapter
❐ Option 200 adds:
85032-60019 Type-N (m) to Type-N (m) adapter
❐ Option 300 adds:
85032-60020 Type-N (m) to Type-N (f) adapter
❐ Option 500 adds:
85054-60001 Type-N (f) to 7 mm adapter (two included)
85054-60009 Type-N (m) to 7 mm adapter (two included)
❐ 85054D economy: 45 MHz to 18 GHz. Includes:
85054-60025 Type-N (m) short
85054-60026 Type-N (f) short
85054-60027 Type-N (m) open
85054-60028 Type-N (f) open
85054-60031 Type-N (f) to 7 mm adapter
85054-60032 Type-N (m) to 7 mm adapter
85054-60037 Type-N (f) to Type-N (f) adapter
85054-60038 Type-N (m) to Type-N (m) adapter
85054-60046 Type-N (m) fixed load
85054-60047 Type-N (f) fixed load
Electronic calibration kits
❐ 85092B RF ECal: 30 kHz to 9 GHz. Includes:
85092-60005 Type-N (f) to Type-N (m) RF ECal module
❐ Option 00M substitutes module with:
85092-60006 Type-N (m) to Type-N (m) RF ECal module
❐ Option 00F substitutes module with:
85092-60007 Type-N (f) to Type-N (f) RF ECal module
❐ Option 00A adds:
85054-60037 Type-N (f) to Type-N (f) adapter
85054-60038 Type-N (m) to Type-N (m) adapter
3