Selecting Units Of Measurement From The Softkeys - Agilent Technologies E4418B User Manual

Selecting Units of Measurement from the Softkeys

In various softkey menu structures you are required to enter the units of measurement
for power. In some cases, due to the wide power range available, the following menu
is displayed:
Note
Pressing
or decreases the multiplier shown in front of
multiplier has been selected confirms the entry.
Agilent E4418B User's Guide
More
Some softkeys may be grayed out so that an invalid value cannot be entered.
Increment Multiplier
Selecting Units of Measurement from the Softkeys
mW
µW
nW
Cancel
W
Increment
Multiplier
Decrement
Multiplier
Cancel
or
Decrement Multiplier
. Pressing
W W
Power Meter Operation
increases
after the correct
2-33