L-Mount Kit Installation - Agilent Technologies U2300A Series User Manual

L-Mount Kit Installation

U2300A Series DAQ User's Guide
The L- Mount kit is to be used with Agilent U2781A USB modular
instrument chassis. The following instructions describes simple
procedures of installing the L- Mount kit to a U2300A DAQ device.
Getting Started
1
Unpack the L- Mount kit from
the packaging.
2
Remove your DAQ device from
its plastic casing by pulling the
bumper (front end of the casing) in
an outward direction. Then, lift the
plastic body casing and remove it
from your DAQ device.
3
Using a Philips screw driver,
screw the L- Mount kit to your DAQ
device.
1
21