Table of Contents
Advertisement
Option 012, Direct Access Receiver Configuration
This option provides front panel access to the A and B samplers This allows
direct access to the sampler inputs for improved sensitivity in applications such
as antenna tests, or for the insertion of attenuators between the couplers and
samplers to allow measurements of up to 1 Watt (+ 30 dBm) at the input of the
test ports Direct access to the B sampler provides a test configuration for the
HP 8722D that gives increased dynamic range in the forward direction.
Option 400, Four-Sampler Test Set
This option reconfigures the instrument's test set to ratio out the characteristics
of the test port transfer switch, and to include a second reference channel that
allows full accuracy with a TRL measurement calibration.
Option 010, Time Domain
This option allows the analyzer to display the time domain response of a
network by computing the inverse Fourier transform of the frequency domain
response The analyzer shows the response of a test device as a function of
time or distance. Displaying the reflection coefllcient of a network versus time
determines the magnitude and location of each discontinuity. Displaying the
of individual trammissi on paths Time domain operation retains all accuracy
inherent with the active error correction.
Option lCM, Rack Mount Flange Kit Without Handles
Option 1CM is a rack mount kit containing a pair of flanges and the necessary
hardware to mount the instrument, with handles detached, in an equipment
rack with 482.6 mm (19 inches) horizontal spacing.
Option lCP, Rack Mount Flange Kit With Handles
Option 1CP is a rack mount kit containing a pair of flanges and the necessary
hardware to mount the instrument with handles attached in an equipment rack
mm (19 inches) spacing.
with 482.6
Advertisement
Table of Contents
Troubleshooting
