Overview
Service Equipment You Will Need
Service Equipment You Will Need
The service kit facilitates making measurements on various assemblies
within the instrument. Refer to
Agilent test equipment used for making measurements. Alternative
equipment model numbers are given in case the recommended
equipment is not available.
If neither the recommended nor the alternative test equipment are
NOTE
available, you may use substitute equipment that meets or exceeds the
critical specifications required to perform measurements.
Service Kit Parts List
The service kit contains extender boards that enable access to
measurement points that cannot otherwise be accessed when the
instrument is operational.
Table 1-2
Agilent Service Kit (Agilent part number E4440-60090)
Agilent Part
Extender Boards
A7 DIF Extender Board
nd
A8 AIF, A9 2
LO
Extender Board
A10, A11, A12, A13
Extender Board
A13J12 Bias Adjustment Board
Synthesizer Extender Board
Guides (2 ea.)
Synthesizer Board Support (2 ea.)
Synthesizer Board Support (2 ea.)
Cables
20-Conductor Ribbon Cable (3 ea.)
10-Conductor Ribbon Cable
8-Conductor Ribbon Cable
22
Table 1-3
Agilent Part Number
E4406-60021
E4440-60048
E4440-60049
E4440-60041
E4440-00025
E4440-00026
E4440-20113
E4440-60331
E4440-60332
E4440-60333
for a list of recommended
Specifications
Specific to preamp,
electronic attenuator,
FIFA.
Specific to SLODA.
Specific to YTO.
Chapter 1