Marker Trace - Agilent Technologies FieldFox N9923A User Manual

Coupled Markers ON allows Marker 2 to be moved on ALL traces at the same time.
How to create Uncoupled Markers
NOTE Markers are coupled by default.
To create markers that are NOT coupled (move independently on each trace):
 Press Marker
 Then
 Then

Marker Trace

Both CAT and NA Modes can display a data trace and a memory trace. By
default, markers are assigned to the data trace. However, you can move a marker
between the data and memory trace. The marker moves to the same X-axis
location on the specified trace.
When Coupled Markers is ON, this setting applies to the active marker for ALL
traces that are coupled. Otherwise, this setting applies to the active marker on
only the active trace.
How to move a marker between data and memory traces
 Create a data and memory trace that will host the marker. Learn how on page
 Press Marker and Enter to create a marker.
 Then
 Then select the marker to move using
 Then toggle
Data Analysis Features
More
Coupled Markers OFF
84.
More
Marker Trace Auto Data
Auto - Marker resides on data trace when it is visible. Marker resides on
o
memory trace when only IT is visible.
Data - Marker resides on data trace, even when not visible.
o
Mem - Marker resides on memory trace, even when not visible. If a memory
o
trace is not stored, the marker moves to 0.0 dB at the same X-axis position
Marker 1,2,3,4,5,6.
Mem.
79