Trace<1|2>:Iq:set <Filter Type>,<Rbw>,<Sample Rate>,<Trigger Source>,<Trigger Slope>,<Pretrigger Samples>,<# Of Samples; Trace:iq:srate 15.625Khz To 32Mhz; Trace:iq:state On | Off - Agilent Technologies X Series User Manual

type>,<rbw>,<sample rate>,<trigger source>,<trigger slope>,<pretrigger samples>,<# of samples>.
Remote Command
Example
Remote Command Notes
TRACe<1|2>:IQ:SET <filter type>,<rbw>,<sample rate>,<trigger source>,<trigger
slope>,<pretrigger samples>,<# of samples>
Specifies the analyzer settings for measurement of I/Q data.
Remote Command
Example
Remote Command Notes

TRACe:IQ:SRATe 15.625kHz to 32MHz

Specifies the sampling rate for I/Q data acquisition.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Min
Max

TRACe:IQ:STATe ON | OFF

Switches the current measurement between SWEEP mode and I/Q mode.
Remote Command
Example
Remote Command Notes
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:TRACe[1]:IQ:DATA?
TRAC:IQ:DATA?
FSP, FSU
TRACe[1]:IQ:SET <filter type>,<rbw>,<sample
rate>,<trigger source>,<trigger slope>,<pretrigger
samples>,<# of samples>
TRAC:IQ:SET NORM,10MHz,32MHz,EXT,POS,0,2048
TRAC:IQ:SET NORM,1MHz,4MHz,EXT,POS,1024,512
FSP, FSU
TRACe[1]:IQ:SRATe <freq>
TRACe[1]:IQ:SRATe?
TRAC:IQ:SRAT 4MHZ
TRAC:IQ:SRAT?
FSP, FSU
32MHz
Saved in instrument state.
15.625kHz
32MHz
:TRACe:IQ:STATe ON|OFF|1|0
:TRACe:IQ:STATe?
TRAC:IQ:STAT ON
FSP, FSU
Compatible SCPI Commands
Supported SCPI Commands
161