Feeding System; Removing The Deck Pickup Unit; Removing The Deck Pickup Roller - Canon 1130 Service Manual

CHAPTER 10 PAPER DECK
D. Feeding System

1. Removing the Deck Pickup Unit

1) Remove the upper cover.
2) Disconnect the two connectors [1], and
remove the five screws [2].
3) Remove the deck pickup unit [3].
When mounting the deck
pickup unit [3], be sure to
tighten the three screws
shown in the figure first.

2. Removing the Deck Pickup Roller

1) Remove the deck pickup unit.
2) Turn over the deck pickup unit, and
remove the resin ring [1] (one each); then,
remove the deck pickup roller [2].
10-34
COPYRIGHT © 2002 CANON INC.
[1]
[2]
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2] [3]
Figure 10-337
[3]
Screws
Figure 10-338
[2]
[1]
Figure 10-339
[2]
[2]