Pick-Up/Feeding System; Paper Deck; Removing The Paper Deck; Removing The Cover - Canon 1000 Service Manual

III. PICK-UP/FEEDING
SYSTEM
A. Paper Deck

1. Removing the Paper Deck

1) Disconnect the connector of the paper deck
from the copier.
2) Slide out the paper deck.
3) Remove the fixing screws [1] from the rail
(front, rear) of the paper deck.
[1]
Figure 4-301A

2. Removing the Cover

1) Remove the four mounting screws [3] each,
and remove the paper deck front cover [1] and
the paper deck rear cover [2].
[1]
Figure 4-302A
COPYRIGHT © 2001 CANON INC.
[3]
[2]
[3]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
[3]
[2]
Figure 4-303A
2) Remove the four mounting screws [5], and
remove the paper deck top cover [4].
[5]
Figure 4-304A
[3]
[1]
[4]
[5]
4-21