Debug Xbc - Cisco MDS 9124 - Fabric Switch Reference

debug xbc

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug xbc
To enable crossbar client debugging (XBC), use the debug xbc command in EXEC mode. To disable a
debug command, use the no form of the command or use the no debug all command to turn off all
debugging.
Syntax Description demux
deque
init
main
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines Use this command to debug crossbar client events and information.
Examples The following example displays the system output when the debug xbc init command is issued:
switch# debug xbc init
Related Commands Command
no debug all
Cisco MDS 9000 Family Command Reference
6-134
debug xbc {demux | deque | init | main}
no debug xbc {demux | deque | init | main}
Modification
This command was introduced.
Description
Disables all debugging.
Enables debugging for crossbar demux functions.
Enables debugging for crossbar deque events.
Enables debugging for crossbar initialization.
Enables debugging for crossbar main functions.
Chapter 6 Debug Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x