Enrollment Terminal - Cisco MDS 9124 - Fabric Switch Reference

enrollment terminal

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
enrollment terminal
To enable manual cut-and-paste certificate enrollment through the switch console, use the enrollment
terminal command in trust point configuration submode. To revert to the default certificate enrollment
process, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults The default enrollment method is manual cut-and-paste, which is the only enrollment method that the
MDS switch currently supports.
Command Modes
Trust point configuration submode.
Command History Release
3.0(1)
Usage Guidelines None.
Examples
The following example shows how to configure trust point enrollment through the switch console.
switch# config terminal
switch(config)# crypto ca trustpoint admin-ca
switch(config-trustpoint)# enrollment terminal
The following example shows how to discard a trust point enrollment through the switch console.
switch(config)# crypto ca trustpoint admin-ca
switch(config-trustpoint)# no enrollment terminal
Related Commands Command
crypto ca authenticate Authenticates the certificate of the certificate authority.
Cisco MDS 9000 Family Command Reference
7-6
enrollment terminal
no enrollment terminal
Modification
This command was introduced.
Description
Chapter 7
OL-16217-01, Cisco MDS SAN-OS Release 3.x
E Commands