Cisco MDS 9124 - Fabric Switch Reference page 448

debug san-ext-tuner
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug san-ext-tuner
To enable debugging for SAN extension tuner, use the debug san-ext-tuner command in EXEC mode.
To disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description all
demux
deque
error
event
ha
trace
detail
warning
Defaults None.
Command Modes EXEC mode.
Command History Release
2.0(x)
Usage Guidelines
None.
Examples The following example displays the system output when the debug san-ext-tuner error command is
issued.
switch# debug san-ext-tuner error
Related Commands Command
isns-server enable
no debug all
Cisco MDS 9000 Family Command Reference
6-102
debug isns {all | demux | deque | error | event | ha | trace [detail] | warning}
no debug isns {all | bypass ficon_mgr | demux | deque | error | event | ha | trace [detail] |
warning}
Enables all SAN extension tuner debugging.
Enables debugging for SAN extension tuner message demux.
Enables debugging for SAN extension tuner message dequeue.
Enables debugging for SAN extension tuner error conditions.
Enables debugging for SAN extension tuner events.
Enables debugging for SAN extension tuner high availability.
Enables debugging for SAN extension tuner trace.
Enables detailed debugging for SAN extension tuner trace.
Enables debugging for SAN extension tuner warnings.
Modification
This command was introduced.
Description
Enables the iSNS server.
Disables all debugging.
Chapter 6 Debug Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x