Debug Security - Cisco MDS 9124 - Fabric Switch Reference

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug security

To enable debugging for the security and accounting features, use the debug security command in
EXEC mode. To disable a debug command, use the no form of the command or use the no debug all
command to turn off all debugging.
Syntax Description all
events
mts
radius
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example displays the system output when the debug security radius command is issued:
switch# debug security radius
Mar
authentication
Mar
Mar
Mar
Mar
Mar
operation:success
Mar
Mar
Related Commands Command
no debug all
OL-16217-01, Cisco MDS SAN-OS Release 3.x
debug security {all | events | mts | radius}
no debug security {all | events | mts | radius}
Modification
This command was introduced.
5 00:51:13 securityd: RADIUS is enabled, hence it will be tried first for CHAP
5 00:51:13 securityd: reading RADIUS configuration
5 00:51:13 securityd: opening radius configuration for group:default
5 00:51:13 securityd: opened the configuration successfully
5 00:51:13 securityd: GET request for RADIUS global config
5 00:51:13 securityd: got back the return value of global radius configuration
5 00:51:13 securityd: closing RADIUS pss configuration
5 00:51:13 securityd: opening radius configuration for group:default
Description
Disables all debugging.
Enables debugging for all security features.
Enables debugging for security events.
Enables debugging for security MTS packets.
Enables debugging for RADIUS events.
Cisco MDS 9000 Family Command Reference
debug security
6-109