Debug Rscn - Cisco MDS 9124 - Fabric Switch Reference

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug rscn

To enable debugging for the registered state change notification (RSCN) feature, use the debug rscn
command in EXEC mode. To disable a debug command, use the no form of the command or use the no
debug all command to turn off all debugging.
Syntax Description all
errors
events
mts-errors
mts-events
vsan vsan-id
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example displays the system output when the debug rscn errors command is issued:
switch# debug rscn errors
Related Commands Command
no debug all
show rscn
OL-16217-01, Cisco MDS SAN-OS Release 3.x
debug rscn {all | errors | events | mts-errors | mts-events} [vsan vsan-id]
no debug rscn {all | errors | events | mts-errors | mts-events} [vsan vsan-id]
Modification
This command was introduced.
Description
Disables all debugging.
Displays RSCN information.
Enables debugging for all RSCN features.
Enables debugging for RSCN errors.
Enables debugging for RSCN events.
Enables debugging for RSCN MTS errors.
Enables debugging for RSCN MTS events.
Restricts debugging to the specified VSAN.
Cisco MDS 9000 Family Command Reference
debug rscn
6-101