Cisco MDS 9124 - Fabric Switch Reference page 485

Chapter 7 E Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
enable
To enable the Call Home function, use the enable command in Call Home configuration submode. To
disable this feature, use the disable command.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes
Call Home configuration submode.
Command History Release
1.0(2)
Usage Guidelines To disable the Call Home function, use the disable command.
Examples The following example shows how to enable the Call Home function.
switch# config terminal
Enter configuration commands, one per line.
switch(config)# callhome
switch(config-callhome)# enable
Related Commands Command
callhome
callhome test
show callhome
OL-16217-01, Cisco MDS SAN-OS Release 3.x
enable
Modification
This command was introduced.
Description
Configures the Call Home function.
Sends a dummy test message to the configured destination(s).
Displays configured Call Home information.
End with CNTL/Z.
Cisco MDS 9000 Family Command Reference
enable
7-3