3Com 5500-EI PWR Reference Manual page 275

Hide thumbs Also See for 5500-EI PWR:

Table of Contents

The VLAN-VPN tunnel function can only be enabled on STP-enabled devices.

To enable the VLAN-VPN tunnel function, make sure the links between operator's networks are

trunk links.

If a fabric port exists on a switch, you cannot enable the VLAN-VPN function for any port of the

# Enable the VLAN-VPN tunnel function for the switch.

<Sysname> system-view

System View: return to User View with Ctrl+Z.

[Sysname] vlan-vpn tunnel

Chapters

Table of Contents

5500-ei series