Show Ssm Provisioning - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show ssm provisioning

To display the attributes of the Storage Services Module (SSM) installed, use the show ssm provisioning
command.
Syntax Description This command has no other arguments or keywords.
Command Default None.
Command Modes
EXEC mode.
Command History Release
2.0(2)
2.1(1a)
Usage Guidelines
None.
Examples The following example provisions the SSM installed in the switch.
switch# show ssm provisioning
Module
-----------------------------------------------------------
Table 22-9
Table 22-9
Field
Module
Ports
Application
Provisioning Status
Related Commands Command
ssm enable feature
OL-18089-01, Cisco MDS NX-OS Release 4.x
show ssm provisioning
Modification
This command was introduced.
Added Provisioning Status column to the display.
Ports Application
4 1-32 scsi-flow
describes the significant fields shown in the show ssm provisioning command output.
show ssm provisioning Field Descriptions
Description
Slot where SSM is installed.
Ports available on the SSM.
Feature configured on the SSM.
Displays the status of the SSM attributes.
Description
Enables the SCSI flow feature on the SSM.
Provisioning Status
success
Cisco MDS 9000 Family Command Reference
show ssm provisioning
22-391