Show System Internal Snmp Lc - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show system internal snmp lc

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show system internal snmp lc
To display the active policies of the line card, use the show system internal snmp lc command.
Syntax Description
module-id
counters
Defaults None.
Command Modes EXEC mode.
Command History Release
NX-OS 4.1(1b)
Usage Guidelines
None.
Examples The following example shows the port monitor line card information:
switch# show system internal snmp lc 4
--------------------------------------------------------------------------------
-----------
No. of ports monitored: 0
--------------------------------------------------------------------------------
-----------
--------------------------------------------------------------------------------
-----------
Ports:
Time since activation: 23:51:52 UTC Jun 30 2000
--------------------------------------------------------------------------------
-----------
--------------------------------------------------------------------------------
-----------
Counter
event In Use
-------
---- ------
Link Loss
Sync Loss
--More--
switch#
The following example shows the port monitor line card information for the module counter:
switch# show system internal snmp lc counters
switch#
Cisco MDS 9000 Family Command Reference
22-400
show system internal snmp lc {module-id | counters}
Modification
This command was introduced.
Threshold
---------
Delta
Yes
Delta
Specifies the module ID number.
Displays the port monitor line card information for module counters.
Interval Rising Threshold event Falling Threshold
-------- ---------------- ----- ------------------ -
60 5
60 5
Chapter 22
4 1
4 1
OL-18089-01, Cisco MDS NX-OS Release 4.x
Show Commands
4
4