Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 1460

show startup-config
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show startup-config
To display the startup configuration file, use the show startup-config command
Syntax Description
log
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example displays the switch configuration at startup.
switch# show startup-config
vsan database
vsan 2
vsan 3
vsan 4
vsan 5
vsan 31
vsan 32 suspend
vsan 100
vsan 300
interface port-channel 1
switchport mode E
switchport trunk mode off
interface port-channel 2
fspf cost 100 vsan 2
switchport mode E
no switchport trunk allowed vsan all
switchport trunk allowed vsan add 1-99
switchport trunk allowed vsan add 101-4093
interface port-channel 3
switchport mode E
switchport trunk mode off
interface port-channel 4
switchport mode E
no switchport trunk allowed vsan all
Cisco MDS 9000 Family Command Reference
22-392
show startup-config [log]
Displays execution log of last used ASCII startup configuration.
Modification
This command was introduced.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x