Polling-Interval - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
interfaces
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3594
®
OS for EX Series Ethernet Switches, Release 10.3
interfaces interface-name {
disable;
polling-interval seconds;
sample-rate number;
}
[edit protocols sflow]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Configure sFlow network traffic monitoring on the specified interface on the switch. You
can configure sFlow parameters such as polling interval and sample rate with different
values on different interfaces, and you can also disable sFlow monitoring on individual
interfaces.
The remaining statements are explained separately.
—Name of the interface on which to configure sFlow parameters.
interface-name
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 56
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 3579
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 3584
Copyright © 2010, Juniper Networks, Inc.