Show Multicast Mrinfo; Table 316: Show Multicast Mrinfo Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show multicast mrinfo

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields

Table 316: show multicast mrinfo Output Fields

Field Name Field Description
Query address, hostname (DNS name or IP address of the source address), and multicast protocol
source-address
version or the software version of another vendor.
Queried router interface address and directly attached neighbor interface address, respectively.
ip-address-1--->ip-address-2
or Name or IP address of neighbor.
(name ip-address)
Neighbor's multicast profile:
[metric/threshold/type/
flags]
2468
®
OS for EX Series Ethernet Switches, Release 10.3
show multicast mrinfo
<host>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display configuration information about IP multicast networks, including neighboring
multicast router addresses.
—Display configuration information about all multicast networks.
none
—(Optional) Display configuration information about a particular host. Replace host
host
with a hostname or IP address.
view
show multicast mrinfo on page 2469
Table 316 on page 2468 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
—Always has a value of
metric
device.
—Multicast threshold time-to-live (TTL). The range of values is
threshold
—Multicast connection type:
type
—Flags for this route:
flags
querier —Queried router is the designated router for the neighboring session.
—Link is a leaf in the multicast network.
leaf
—Link status indicator.
down
, because queries the directly connected interfaces of a
1 mrinfo
or .
pim tunnel
show multicast mrinfo command.
through .
0 255
Copyright © 2010, Juniper Networks, Inc.