Information Center Configuration; Information Center Configuration Task List - 3Com 4500 Configuration Manual

Module
The module field represents the name of the module that generates system information. You can enter
the info-center source ? command in system view to view the module list. Refer to
module name and description.
Between "module" and "level" is a "/".
Level (Severity)
System information can be divided into eight levels based on its severity, from 1 to 8. Refer to
for definition and description of these severity levels. Note that there is a forward slash "/" between the
level (severity) and digest fields.
Digest
The digest field is a string of up to 32 characters, outlining the system information.
Note that there is a colon between the digest and content fields.
For system information destined to the log host,
If the character string ends with (l), it indicates the log information
If the character string ends with (t), it indicates the trap information
If the character string ends with (d), it indicates the debugging information
Source
This field indicates the source of the information, such as the source IP address of the log sender. This
field is optional and is displayed only when the output destination is the log host.
Context
This field provides the content of the system information.

Information Center Configuration

Information Center Configuration Task List

Complete the following tasks to configure information center:
Configuring Synchronous Information Output
Configuring to Display the Time Stamp with the UTC Time Zone
Setting to Output System Information to the Console
Setting to Output System Information to a Monitor Terminal
Setting to Output System Information to a Log Host
Setting to Output System Information to the Trap Buffer
Setting to Output System Information to the Log Buffer
Setting to Output System Information to the SNMP NMS
Task
1-6
Table 1-3 for
Table 1-1
Remarks
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional