RIP C
OMMANDS
SHOW IP PROTOCOLS RIP
show ip protocols rip
Overview
Use this command to display RIP process parameters and statistics.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ip protocols rip
Mode
User Exec and Privileged Exec
awplus#
Example
Output
Figure 24-1: Example output from the show ip protocols rip command
C613-50102-01 REV C
show ip protocols rip
Routing Protocol is "rip"
Sending updates every 30 seconds with +/-50%, next due in 12
seconds
Timeout after 180 seconds, garbage collect after 120 seconds
Outgoing update filter list for all interface is not set
Incoming update filter list for all interface is not set
Default redistribution metric is 1
Redistributing: connected static
Default version control: send version 2, receive version 2
Interface
Send
vlan25
Routing for Networks:
10.10.0.0/24
Routing Information Sources:
Gateway
Distance: (default is 120
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Key-chain
Recv
2
2
BadPackets BadRoutes
"Getting Started
Guide.
Distance Last Update
858