BRP Can-Am Outlander 2015 Series Manual page 84

vmr2012-040-012_a
TYPICAL
1. Grease fittings
vmr2012-040-013_a
TYPICAL
1. Grease fittings
Front Suspension Arm Inspection
1. Check suspension arm for:
– Cracks
– Pitting
– Bending
– Distortion.
2. Check suspension arm for abnormal play:
– Side to side
– Up and down.
3. If any play is detected, inspect:
– Bushings
– Cushions.
4. Check ball joint for:
– Damage
– Pitting
– Play.
5. Check ball joint bellows for:
– Damage
– Cracks.
vmr2013-056
Subsection 03 (PERIODIC MAINTENANCE PROCEDURES)
Rear Suspension Arm Inspection
1. Check suspension arm for:
– Cracks
– Pitting
– Bending
– Distortion.
2. Check suspension arm for abnormal play:
– Side to side
– Up and down.
3. If any play is detected, inspect:
– Bushings
– Cushions.
4. Check ball joint for:
– Damage
– Pitting
– Play.
5. Check ball joint bellows for:
– Damage
– Cracks.
Rear Anti-Sway Bar Bushing
Inspection and Lubrication
Rear Anti-Sway Bar Bushing Inspection
Inspect bushings for:
– Cracks
– Damage
– Abnormal wear.
Rear Anti-Sway Bar Bushing Lubrication
Lubricate bushings at grease fittings.
Anti-sway bar bushing
LUBRICATION
SUSPENSION GREASE
(P/N 293 550 033)
21