BRP Can-Am Outlander 2015 Series Manual page 114

Subsection XX (EXHAUST SYSTEM)
vmr2012-011-011_a
LH SIDE — PARTS REMOVED FOR CLARITY
1. Head pipe
NOTE: The space to remove the front head pipe
is limited. Remove it without force.
Front Head Pipe Inspection
Check head pipe for cracks, bending or other dam-
ages. Replace if needed.
Check if the rubber support is brittle, hard or oth-
erwise damaged. Replace if needed.
Front Head Pipe Installation
The installation is the reverse of the removal pro-
cedure. However, pay attention to the following.
Install NEW exhaust gaskets.
TORQUE
13 N•m ± 1 N•m
Head pipe nuts
(115 lbf•in ± 9 lbf•in)
5
vmr2013-011