BRP Can-Am Outlander 2015 Series Manual page 188

Subsection XX (TOP END)
ROCKER ARM
Rocker Arm Removal
VALVE COVER
Remove
susbsection.
TIMING CHAIN
Refer to
following parts:
– Timing chain tensioner
– Camshaft timing gear.
Remove pan head screw and camshaft retaining
plate.
tmr2011-013-009_a
1. Camshaft retaining plate
2. Pan head screw
3. Cylinder head
Remove rocker arm shafts.
vmr2006-043-016_a
1. Rocker arm shaft
2. Rocker arm (exhaust side)
3. Rocker arm (intake side)
4. Adjustment screw
5. Lock nut
8
. See procedure in this
subsection and remove
Remove rocker arm assembly (exhaust side and
intake side) with adjustment screws and lock
nuts.
Remove thrust washers.
tmr2011-013-010_a
1. Rocker arm (exhaust side)
2. Rocker arm (intake side)
3. Thrust washers
NOTICE
Pay attention not to lose thrust
washers or drop them into the timing chain
compartment.
1
R400motr67A
1. 2 thrust washers
2. Rocker arm (exhaust side)
3. Cylinder head (spark plug side)
4. Big taper to spark plug side
Rocker Arm Inspection
Inspect each rocker arm for cracks and scored fric-
tion surfaces. If so, replace rocker arm assembly.
Check the rocker arm rollers for free movement,
wear and excessive radial play. Replace rocker
arm assembly if necessary.
2 1
3
4
vmr2013-016