Radiator Cooling Fan - BRP Can-Am Outlander 2015 Series Manual

vmr2012-028-006_d
R1: RADIATOR COOLING FAN RELAY
Relay Operation Test (Radiator Cooling
Fan)
1. Remove relay (R1).
2. Bypass relay using a jumper. Refer to
DIAGRAM
to locate proper terminals.
3. If the radiator cooling fan is activated, replace
the relay.
Relay Continuity Test (Radiator
Cooling Fan)
1. Remove relay.
2. Set multimeter to .
REQUIRED TOOL
FLUKE 115 MULTIMETER (P/N 529 035 868)
3. Probe relay as follows.
TERMINAL
30
smr2007-027-050_a
4. Connect battery as shown and probe relay
again as follows.
vmr2013-013
WIRING
RESISTANCE
Open circuit
87
(OL)
Subsection XX (COOLING SYSTEM)
TERMINAL
30
smr2007-027-060_a
If relay failed any test, replace it.

RADIATOR COOLING FAN

Radiator Cooling Fan Operation
The ECM controls the radiator cooling fan via the
input of the coolant temperature sensor (CTS) and
the manifold air pressure and temperature sensor
(MAPTS). Refer to the following tables.
AIR INTAKE
TEMPERATURE
88°C (190°F)
85°C (185°F)
ENGINE COOLING
TEMP. FAN
95°C
Turns ON
(203°F)
93°C
Turn OFF
(199°F)
115°C
ON
(239°F)
118°C
ON
(244°F)
Radiator Cooling Fan Fuse Location
The fuse (F9) is located in front fuse box under
gauge support.
RESISTANCE
0.5 max.
87
(continuity)
COOLING FAN
Turns ON
Turns OFF
CHECK
GAUGE
ENGINE
MESSAGE
LIGHT
Check
Turns ON engine
Hi Temp
Limp
Flashes
Home
9