BRP Can-Am Outlander 2015 Series Manual page 59

Subsection XX (PERIODIC MAINTENANCE PROCEDURES)
3. Clean spherical bearing using a shop rag to re-
move any dirt and debris.
4. Lubricate spherical bearing as illustrated.
SPHERICAL BEARING LUBRICATION
SUSPENSION GREASE (P/N 293 550 033)
vmr2010-004-701_b
1. Apply grease here
5. Install O-rings then shock sleeves.
6. Install shock absorber.
Front Suspension Arm Lubrication
Lubricate suspension arm at grease fittings.
SUSPENSION ARM LUBRICATION
SUSPENSION GREASE (P/N 293 550 033)
vmr2012-040-012_a
TYPICAL
1. Grease fittings
20
vmr2012-040-013_a
TYPICAL
1. Grease fittings
Front Suspension Arm Inspection
1. Check suspension arm for:
– Cracks
– Pitting
– Bending
– Distortion.
2. Check suspension arm for abnormal play:
– Side to side
– Up and down.
3. If any play is detected, inspect:
– Bushings
– Cushions.
4. Check ball joint for:
– Damage
– Pitting
– Play.
5. Check ball joint bellows for:
– Damage
– Cracks.
Rear Suspension Arm Inspection
1. Check suspension arm for:
– Cracks
– Pitting
– Bending
– Distortion.
2. Check suspension arm for abnormal play:
– Side to side
– Up and down.
3. If any play is detected, inspect:
– Bushings
– Cushions.
vmr2012-005