BRP Can-Am Outlander 2015 Series Manual page 5

INTRODUCTION
A number of procedures throughout the book re-
quire the use of special tools. Before starting any
procedure, be sure that you have on hand all re-
quired tools, or their approved equivalents.
The use of RIGHT and LEFT indications in the text
are always referenced to the driving position (sit-
ting on the vehicle).
vmr2012-002-001_a
TYPICAL
1. Left
2. Right
This manual uses technical terms which may be
different from the ones of the parts catalogs.
When ordering parts always refer to the specific
PARTS CATALOGS
model .
NOTICE
Most fasteners are metric, and most
components are built with parts dimensioned
using the metric system. Consult the appropri-
PARTS CATALOG
ate to obtain and use the cor-
rect parts and fasteners. Mismatched or incor-
rect fasteners could cause damage to the vehi-
cle.
MANUAL LAYOUT
This manual is divided into many major sections as
can be seen in the main table of contents at the
beginning of the manual.
Each section is divided into various subsections,
and again, each subsection has one or more divi-
sions.
Illustrations and photos show the typical construc-
tion of various assemblies and, in all cases, may
not reproduce the full detail or exact shape of the
parts used in a particular model vehicle. However,
they represent parts which have the same or a
similar function.
IV
vmr2013-002