BRP Can-Am Outlander 2015 Series Manual page 333

Subsection XX (GEARBOX AND 4X4 COUPLING UNIT (1000))
vmr2012-020-008_a
1. Snap ring
2. Shifting sleeve (LOW/REVERSE range gear)
3. Snap ring
4. Free pinion (REVERSE range gear)
5. Needle bearing
6. Main shaft assembly
Gearbox Right Cover
Remove ACTUATOR and
SITION SENSOR) , see procedures in this subsec-
tion.
Unscrew all bolts retaining the gearbox right
cover.
Tmr2011-016-031_a
1. 5 screws M8 x 55
2. 2 screws M6 x 85
3. 2 screws M6 x 55
4. 8 screws M6 x 35
To remove cover, use 2 big screwdrivers.
16
GBPS (GEARBOX PO-
Tmr2011-016-032
POSITION FOR BIG FLAT SCREWDRIVER
Tmr2011-016-033
POSITION FOR BIG FLAT SCREWDRIVER
Shift Shaft and Shift Drum
Withdraw shift shaft assembly.
Tmr2011-016-071_a
1. Shift shaft assembly
Remove screw retaining the shifting intermediate
gear.
vmr2012-020