BRP Can-Am Outlander 2015 Series Manual page 286

TIGHTENING SEQUENCE
(DRIVEN PULLEY SCREW)
STEP 1 20 N•m ± 1 N•m (15 lbf•ft ± 1 lbf•ft)
STEP 2
tmr2013-019-007_a
1. Driven pulley screw
2. Clutch holder
Check driven pulley end play.
SPECIFICATION
Driven pulley end play
CVT AIR GUIDE
CVT Air Guide Removal
DRIVE PULLEY
1. Remove the
PULLEY
.
2. Unscrew the clamps retaining the CVT air
hoses.
3. Remove CVT air guide.
CVT Air Guide Inspection
Clean CVT air guide from contamination
Check O-rings. If brittle, hard or damaged, replace
as necessary.
vmr2013-059
Subsection 11 (CONTINUOUSLY VARIABLE TRANSMISSION (CVT))
180° ± 5°
0 mm (0 in)
DRIVEN
and the
vmr2012-018-020_a
650 ENGINE
1. CVT air guide
2. O-rings
vmr2012-018-030_a
1000 ENGINE
1. CVT air guide
2. O-rings
CVT Air Guide Installation
For installation reverse the removal procedure.
23