BRP Can-Am Outlander 2015 Series Manual page 740

Subsection XX (BODY (OUTLANDER))
7. Remove retaining screw securing RH rear stor-
age compartment support to rear storage com-
partment.
vmr2013-045-031_a
1. Retaining screws securing RH rear storage compartment
support to RH support
2. Retaining screw securing RH fender to rear storage
compartment
3. Retaining screw securing RH rear storage compartment support
to rear storage compartment
8. Remove RH rear storage compartment sup-
port.
9. Remove retaining screw securing top of RH
fender to top of rear storage compartment.
vmr2013-045-029_a
1. Retaining screw securing top of RH fender to top of rear storage
compartment
10. Remove retaining screw securing LH rear
storage compartment support to rear storage
compartment.
11. Remove retaining screw securing LH support
and LH rear storage compartment support to
rear storage compartment.
26
vmr2013-045-030_a
1. Retaining screw securing LH rear storage compartment support
to rear storage compartment
2. Retaining screw securing LH support and LH rear storage
compartment support to rear storage compartment
12. Remove both retaining screws securing LH
fender to rear storage compartment.
vmr2013-045-027_a
1. Retaining screws securing LH fender to rear storage
compartment
13. Remove rear storage compartment.
Rear Storage Compartment Installation
Installation is the reverse of removal. However
pay attention to the following:
TIGHTENING TORQUE
Rear top panel screws
Rear storage
compartment retaining
screws
4.5 N•m ± 0.5 N•m
(40 lbf•in ± 4 lbf•in)
10 N•m ± 2 N•m
(89 lbf•in ± 18 lbf•in)
vmr2013-045