BRP Can-Am Outlander 2015 Series Manual page 271

Subsection 11 (CONTINUOUSLY VARIABLE TRANSMISSION (CVT))
vmr2006-021-016_a
1. Removal direction
2. Assembly direction
NOTE: Whenever removing a governor cup which
already has two marked boxes, replace it by a new
one.
vmr2006-021-018
Sliding Sheave
Unscrew lock nut and remove centrifugal lever
pivot bolt. This drive pulley is equipped with 6
levers.
Remove centrifugal lever and both thrust wash-
ers.
Vmr2012-018-024_a
1. Lock nut
2. Centrifugal lever pivot bolt
3. Centrifugal lever
4. Thrust washers
8
Fixed Sheave
WARNING
Always wear safety glasses to remove spring
sleeves.
Pull and rotate one-way clutch slowly until the
spring sleeves are visible.
vmr2006-021-020_a
1. One-way clutch
2. Fixed sheave
3. Spring sleeve area
Hold both spring sleeves with fingers and carefully
remove them when the one-way clutch is disen-
gaged.
vmr2006-021-021_a
1. Springs
2. Spring sleeves
vmr2013-059