BRP Can-Am Outlander 2015 Series Manual page 213

tmr2011-045-011_a
TYPICAL
1. Cylinder head base
2. Marks on timing gear of the opposite cylinder
Camshaft Timing Piston No. 2 (rear)
1. Remove spark plugs of both cylinders.
2. Remove valve covers of both cylinders.
3. Remove the screw plug and O-ring from mag-
neto cover.
vmr2012-017-001_a
1. Screw plug
2. O-ring
4. Remove the crankshaft position sensor (CPS).
vmr2013-017
Subsection XX (TIMING CHAIN)
tmr2011-014-031_a
1. CPS
2. Screw
5. Set rear piston no. 2 to TDC ignition by turning
the crankshaft clockwise.
REQUIRED TOOL
Allen key 14 mm
tmr2011-014-033_a
TURN CRANKSHAFT CLOCKWISE TO PISTON NO. 2 TDC
1. Allen key 14 mm
5.1 The rear piston is at TDC when it's index
mark on the magneto flywheel is aligned
with the notch in the magneto cover.
7