BRP Can-Am Outlander 2015 Series Manual page 418

Subsection XX (DIAGNOSTIC SYSTEM AND FAULT CODES)
U220E
ECM
U3001 SCM
U3001 DPS
34
Invalid Check Sum
from CLUSTER
message
Module improper
Damaged circuit wires or
shutdown
Module improper
shutdown
Check Sum error
Lost of power on SCM
damaged SCM pins.
Lost of power on DPS
that can be caused by
damaged circuit wires
or damaged DPS pins.
External troubleshooting
is not possible
Check for communication fault
Check fuse
Ensure SCM connector
is fully inserted.
Check for Damaged circuit
wires or damaged SCM pins.
Check the two DPS fuses
Ensure DPS connector
is fully inserted.
Check for Damaged tail light,
DPS, Cluster circuit wires
Check for damaged DPS pins.
tmr2013-025