BRP Can-Am Outlander 2015 Series Manual page 491

Subsection XX (WIRING HARNESS AND CONNECTORS)
529036175
1. Remove rear protector from connector.
2. Pull out the connector lock.
smr2009-045-025_a
3. Insert tool to unlock terminal.
smr2009-045-026_a
1. Unlock here
4. Gently pull on the wire to extract the terminal
out the back of the connector.
26
smr2009-045-027_a
NOTICE
Before installing wire terminals in
the connector, ensure all terminals are prop-
erly crimped on wires. After installation of
wire terminals in the connectors, ensure they
are properly locked by gently pulling on them
as if to extract them.
FURUKAWA CONNECTOR
Furukawa Connector Application
Voltage regulator/rectifier.
Terminal Removal
1. Remove the secondary lock (plastic insert).
smr2010-050-021_a
Step 1: Remove the secondary lock
2. Carefully insert the
GM TERMINAL EXTRACTOR
between the lock and the pin to
(P/N 12094430)
release the pin.
smr2010-052-003
GM TERMINAL EXTRACTOR (P/N 12094430)
vmr2013-030