BRP Can-Am Outlander 2015 Series Manual page 156

Subsection 05 (COOLING SYSTEM)
TERMINAL
30
smr2007-027-050_a
4. Connect battery as shown and probe relay
again as follows.
TERMINAL
30
smr2007-027-060_a
If relay failed any test, replace it.
RADIATOR COOLING FAN
Radiator Cooling Fan Operation
The ECM controls the radiator cooling fan via the
input of the coolant temperature sensor (CTS) and
the manifold air pressure and temperature sensor
(MAPTS). Refer to the following tables.
AIR INTAKE
TEMPERATURE
88°C (190°F)
85°C (185°F)
10
RESISTANCE
Open circuit
87
(OL)
RESISTANCE
0.5 max.
87
(continuity)
COOLING FAN
Turns ON
Turns OFF
ENGINE COOLING
TEMP. FAN
95°C
Turns ON
(203°F)
93°C
Turn OFF
(199°F)
115°C
ON
(239°F)
118°C
ON
(244°F)
Radiator Cooling Fan Fuse Location
The fuse (F9) is located in front fuse box under
gauge support.
vmr2012-028-006_f
1. Cooling fan fuse (F9)
Radiator Cooling Fan Test
1. Disconnect radiator cooling fan connector.
vmr2013-058-011_a
COOLING FAN CONNECTOR
2. Connect cooling fan connector pin B (BU wire)
to a 20 A suitable fuse jumper and then directly
to the positive battery post.
CHECK
GAUGE
ENGINE
MESSAGE
LIGHT
Check
Turns ON engine
Hi Temp
Limp
Flashes
Home
vmr2013-058