BRP Can-Am Outlander 2015 Series Manual page 433

vmr2006-014-060_b
1. Throttle lever
2. Cable barrel
9. Remove barrel from cable.
10. Pull out throttle cable.
11. Pull out throttle body.
Throttle Body Installation
Installation of the throttle body is the reverse of
the removal procedure. However, pay attention to
the following.
Temporarily install throttle body into position.
Properly install cable barrel to throttle cable end.
vmr2006-014-063_a
Hook cable to throttle lever.
vmr2013-027
Subsection XX (ELECTRONIC FUEL INJECTION (EFI))
vmr2006-014-064_a
Rotate throttle body into position and ensure to
index throttle body tab with boot notch.
vmr2006-014-065_a
vmr2006-014-65_a
15